The roof and wall panel roll forming machine is a kind of equipment for processing metal sheets. By rolling metal sheets along a certain bending curve, various shapes of wall panels and roofs can be made. our machines have a certain degree of automation and production efficiency, can meet the needs of mass production, and are widely used in construction, machinery, automobiles, and other industries. Our machine are simple and convenient to operate. It can be controlled manually and automatically. Different molds can also be configured to achieve different shapes of wall panels and roof processing. Finally, our machines have a good quality assurance.
Feature
The input performance of Roof And Wall Panel Roll Forming Machine is excellent, and the AB phase has strong anti-interference ability. And use the fixed value interrupt function to ensure the accuracy. Secondly, the executive part of the machine has a variable frequency drive motor, a hydraulic station motor, two press-fit hydraulic solenoid valves, and two cutter hydraulic solenoid valves. More importantly, we cooperate with KDN text screen to complete parameter setting, alarm display, help information, production data display, etc. Finally, the PLC of our product has 14 inputs/10 relay outputs, which just meets the input and output requirements.
Machine Specifications
|
Manual Decoiler |
Usage: Mainly used to support steel coils, and manually uncoil and straighten the coil into the feeding table. Steel coil width: 940, 1200, 1220 mm. (According to your actual drawing) Loading capacity: 5T Inner diameter: 500-508mm
|
|
Guiding Device |
Adopt a guiding bar and sliding block to control the width and position of the steel sheet. |
|
Roll Forming System |
Material of rollers: High grade 45# steel, roller surfaces polishing, hard plating chrome coated 0.05mm The polished surface and the heat treatment towards the molds also can keep the molding plate surface smooth and not easy to be marked when it is being stamped. |
|
Cutting device |
A. Adopts post cutting, the cutting blade material is Cr12 with quenched treatment, after cutting, there is no material wasted. |
|
Hydraulic System |
It is controlled by a gear wheel oil pump. After filling the hydraulic oil into the hydraulic oil tank, the pump drives the cutter machine to begin the cutting job. |
|
PLC Control System |
The target piece`s length is adjustable and the digit of it can be adjusted. Computed mode has two modes: automatic and manual. The system is easy to operate and use |
|
Run out table |
To receive the finished products. |
Process Drawing
FAQ:
1. Q: What payment terms do you accept?
A: T/T or L/C or West Union or Moneygram or Paypal.
2. Q: Will you arrange the installation of the machine at present after we place the order?
A: All machines will be well tested before delivery, so almost all machines can be used directly, and our machines are easy to install, if your customers need our help, we are happy to arrange the installation, but all costs will be charged by you .
3. Q: How to get after-sales service?
A: If we cause problems, we will provide you with spare parts for free.
If it is man-made problem, we will also send spare parts, but it will be charged. Any questions, you can call us directly.
Hot Tags: roof and wall panel roll forming machine, China roof and wall panel roll forming machine manufacturers, suppliers, factory
